Display Readout - Citizen SRP-280 User Manual

Pressing the [
contrast of the screen lighter or darker. Holding either key down will
make the display become respectively lighter or darker.
1–3

Display Readout

The display comprises the entry line, the result line, and indicators.
Indicator
Entry line
Entry line SRP-280 displays an entry of up to 76 digits. SRP-285
displays an entry of up to 80 digits. Entries begin on
the left ; those with more than 11 digits scroll to the left.
Press [
entry. Press [ 2nd ] [
cursor immediately to the beginning or end of the entry.
Result line It displays a result of up to 10 digits, as well as a
decimal, a negative sign, a " x10 " indicator, and a
2-digits positive or negative exponent. Results that
exceed the digit limit are displayed in scientific
notation.
Indicators The following indicators appear on the display to
indicate you the current status of the calculator.
Indicator
M Independent memory
– Result is negative, or the entry line is full
2nd 2nd set of function keys is active.
MAIN Main mode is active
MODE Mode selection is active
STAT Statistics mode is active
Base-n Base-n mode is active
VLE Variable linear equation mode is active
QE Quadratic equation mode is active
CPLX Complex number mode is active
DEGRAD Angle mode : DEG rees, GRAD s, or RAD s
ENGSCI ENG ineering or SCI entific notation
TAB Number of decimal places displayed is fixed
HYP Hyperbolic-trig function will be calculated
BUSY While an operation is executing
There are digits to the left or right of the display
There are earlier or later results that can be displayed
] or [ ] following [ MODE ] key can make the
MA IN
7 – 8 ÷ 7
] and [ ] to move the cursor through an
Meaning
E – 4
Indicator
66.
Result line
] or [ 2nd ] [ ] to move the