Green Routing Settings - Clarion NX501 Owner's Manual & Installation Manual

x
Directional constraints are taken into account the way that opposite direction is allowed with
a low speed.
x
A private road is used only if the destination is there.
x
Walkways are excluded from routes.
x
x
Maneuver restrictions and directional constraints are taken into account when planning a
route.
x
Roads are used only if access for buses is allowed.
x
Private roads, resident-only roads and walkways are excluded from routes.
x
x
Maneuver restrictions and directional constraints are taken into account when planning a
route.
x
Roads are used only if access for taxis is allowed.
x
Private roads, resident-only roads and walkways are excluded from routes.
Route Planning Method types:
Button

4.3.4 Green routing settings

These settings determine how Green routes will be calculated. They are also used to display the cost and
CO emission of routes.
2
79 NX501/NZ501 English
:
:
Gives a quick route if you can travel at or near the speed limit on all roads.
Usually the best selection for fast and normal cars.
Gives a short route to minimise the distance to travel. It can be practical for slow
vehicles. Searching for a short route regardless of the speed, this route type is
rarely practical for normal vehicles.
Gives a quick but fuel efficient route based on the fuel consumption data given in
Green Routing settings (page 79). Travel cost and CO
estimations only. They cannot take elevations, curves and traffic conditions into
account.
Results in a route with fewer turns and no difficult maneuvers. With this option,
you can make Clarion Mobile Map to take, for example, the freeway instead of a
series of smaller roads or streets.
Description
2
emission calculations are