Initial Installation With The Installation Assistant - Silvercrest SL35T Operation And Safety Notes

Initial installation with the installation assistant

After switching on the receiver for the first time, you will
be led automatically to the Welcome menu.
Please proceed with items 1, 2 and 3 first.
Item 1 (OSD language): Please press the 1 key and
select the desired menu and audio language. After
selection, return with the MENU key.
Item 2 (region): Please press the 2 key and select the
country in which the receiver is to be operated. After
selection, return with the MENU key.
Item 3 (antenna voltage): Please press the 3 key and
enable or disable the power supply for the connected
antenna. In case of an active antenna, power supply
must be enabled, and in case of a passive antenna it
must be disabled. Please follow the instructions in the
operation manual of the connected antenna. After
selection, return with the MENU key.
The installation routine is completed with item 4 (autom.
scan). For this purpose, press the 4 key. Now, the
automatic scan starts. The procedure ends when the
100% mark has been reached. The channels found are
saved in your receiver and the main menu appears.
You can skip the installation routing by pressing the 5 key
as soon as the Welcome menu is displayed.
Getting started
29