Safety Warning - Dual DSA2062 Installation & Owner's Manual

Parking Brake Initialization
DVD Setup - Parking Brake Initialization
• The video display of the in-dash unit will not operate while the vehicle is
moving. This is a safety feature to prevent driver distraction. In-dash video
functions will only operate when vehicle is in Park and the PARKING BRAKE
is engaged. It is illegal in most states for the driver to view video while the
vehicle is in motion. Refer to local laws in your area.
• The vehicle must be in park and the parking brake applied to view video on the
in-dash monitor.
• As a safety feature, a warning message will show on the display when the
vehicle's parking brake is not engaged. Video display on the in-dash monitor
isn't allowed until the PARKING BRAKE is engaged. Connect the pink PARKING
BRAKE wire to the brake switch circuit
AUX AV audio can be heard while the vehicle is in motion without engaging the
parking brake.
1) Come to a complete stop, and put the vehicle in Park.
2) Fully engage parking brake.
DSA2062 OPERATION

SAFETY WARNING

as described on page 6. Note: DVD and
24