External connection
Antenna connection
Antenna input impedance of this unit is 75ohm. VHF/UHF 75ohm coaxial cable can
be connected to the antenna jack directly, if the antenna cable is a 300ohm flat
feeder cable, you need to use the 300ohm/75ohm converter (not included) to con-
nect the antenna cable to the antenna jack.
75
coaxial cable is recommended to eliminate interference and double image
due to the unmatched input impedance of the antenna.
The antenna cable and power line should not be bundled together.
(Optional)
Stand and Wall-mounted
1. How to mount the LCD-LED TV?
(1) Take out the bracket hole cover from groove with screw driver and place on the
bracket hole;
(2) Fasten 4 screws into four nuts on the rear cover;
(3) Fasten 2 brackets with 4 M8 screws on the wall as figure 2 shown;
(4) Carefully check for the strength before releasing the LCD-LED TV.
Note: 200x100mm wall mount bracket & M8 screws not included .
21