Download Print this page
AOC LE32W131 User Manual
AOC LE32W131 User Manual

AOC LE32W131 User Manual

User's manual le32w131

Advertisement

Important Safety Instructions and Maintenance
Important Safety Instructions
CAUTION
Risk of electronic shock, do not open.
Do not attempt to service this product yourself
as opening or removing covers may expose
you to dangerous voltage or other hazards.
Refer all servicing to qualified service personnel.
To reduce the risk of fire or electric shock, do not
expose this product to rain or moisture.
The apparatus shall not be exposed to dripping
or splashing and no objects filled with liquids,
such as vases, shall be placed on the apparatus.
In case of smoke, strange noise or strange smell
from the unit:
Turn off the power switch immediately;
Disconnect the power plug from the power
outlet;
Contact your dealer or service centre. Never
attempt to make repairs yourself because this
could be dangerous.
Never push objects of any kind into the set
through the cabinet slots as they may touch
dangerous voltage points or short-circuit parts that
could result in a fire or electric shock. Never spill
liquid of any kind on the set. Use special caution
in households where children are present. The
apparatus is not suitable for children under 3-year
to operate.
Power supply cords should be routed safety to
prevent life and property from dangerous with
damaged cord.
Mains plug is used as the disconnect device. It
shall remain readily operable and should not be
obstructed during intended use. To be completely
disconnected the apparatus from supply mains, the
mains plug of the apparatus shall be disconnected.
To avoid the fire, no naked flame source,
such as lighted candles, should be
placed on the apparatus.
High Voltage
Do not open
1

Advertisement

loading

Summary of Contents for AOC LE32W131

  • Page 1 Important Safety Instructions and Maintenance Important Safety Instructions CAUTION Risk of electronic shock, do not open. Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. High Voltage Refer all servicing to qualified service personnel.
  • Page 2 Important Safety Instructions and Maintenance Important Safety Instructions An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
  • Page 3 Important Safety Instructions and Maintenance Installation Do not place the set on an unstable cart, stand, table or shelf. The set may fall, causing serious personal injury as well as damage to the product. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.
  • Page 4: Table Of Contents

    Contents General description Specifications and accessories Overview Basic operation External connection Trouble shooting Picture defects and countermeasures Basic operation...
  • Page 5: General Description

    General description Feature: Zero X radiation complies to green environment protection requirement Auto tuning and fine tuning Two composite video input sockets One PC VGA input socket One YPbPr input socket One HDMI input socket (HDMI 1.3) One AV output socket One Headphone output socket Three audio input sockets Multi-language OSD...
  • Page 6: Specifications And Accessories

    LE32W131 Color active matrix LCD-LED display 780X236X550mm 780X41X496mm 9 kg 8.1 kg Altitude 5,000m Altitude 9 Screws QSG (Quick Start Guide) Warranty card Power cable ort base Note: 1. Designs and specifications are subject to change without notice. 2. This model may not be compatible with features and/or specifications that may be...
  • Page 7: Overview

    Overview . Power indicator Green: Normal playing status. Red: Standby status. 2. IR remote sensor Point remote control at this sensor to conduct remote control. . TV/AV Press this button to display the selected signal source as main source. 4. MENU Press this button to display OSD menu.
  • Page 8 Overview...
  • Page 9 Overview Remote control Loading batteries: Remove the lid of the battery compartment. Insert 2 size AAA batteries with polarities as indicated inside the compartment. Replace the lid. Note: One loading of batteries will last 1 year under normal use. If you don’t intend to use the remote control for a long period of time, remove them to avoid damage due to leakage.
  • Page 10: Basic Operation

    Basic operation Remote control introduction 1.INPUT Select input source. 2.POWER Turn your TV on and off. 3.0~9 Use these keys to input digit, letters and special characters. 4.INFO Displays the program information. 5.RECALL To swap to the previous program you wanted from current program. 6.SOUND Select audio mode.
  • Page 11 Basic operation (to be continued) 12.FREEZE Not available for this model. 13.AV Swith to AV mode directly. 14.YPbPr Switch to YPbPr mode directly. 15.PC Switch to PC mode directly. 16.TV Switch to TV mode directly. 17.HDMI Switch to HDMI mode directly. Press this button to shut off sound of the TV temporarily, press again to restore TV sound.
  • Page 12 Basic operation (to be continued) Turning the TV On and Off Plug the power cord into a power jack. If TV is in standby mode, please press POW ER button on the remote control to turn it on. The indicator will switch from red to green. If you want to stop watching TV or go out for a while, you can press POWER button on the re- mote control.
  • Page 13 Basic operation (to be continued) Press Arrow button to enter the submenu and press Arrow button to select the language you desire. Selecting input source Press INPUT button on the remote control, then you can select input sources as following: COMPONENT HDMI Setting color system...
  • Page 14 Basic operation (to be continued) SKIP Arrow button to select “SKIP”, then press Press Arrow button to select “On” or “Off”. On: skip the channel; Off: not skip. Arrow button to select “AFT”, then press Press Arrow button to select “On”...
  • Page 15 Basic operation (to be continued) Adjusting the Picture Press MENU button on the remote control, then press Arrowbutton to select “PICTURE” menu. PICTURE AUDIO SETTING FUNCTION CHANNEL PICTURE M ODE PREFERENCE BRIGHTNESS CONTRAST COLOR TINT SHARPNESS BACKLIGHT COLOUR TEMP . NORMAL FULL SCALE...
  • Page 16 Basic operation (to be continued) Adjusting the Sound Press MENU button on the remote control, then press Arrow button to select “AUDIO ” menu. PICTURE AUDIO SETTING FUNCTION CHANNEL SOUND MODE PREFERENCE EQUALIZER BALANCE MONO ADJUST SELECT ME NU EXIT Adjusting Sound Mode Arrow button to select “SOUND MODE”, use Press...
  • Page 17 Basic operation (to be continued) OSD Language Arrow button to select “LANGUAGE” and press Press Arrow button to select language you desire. Adjusting SCREEN SAVER Arrow button to select “SCREEN SAVER” and press Press Arrow button to set screen saver. Adjusting OSD Position Arrow button to select “OSD Position”...
  • Page 18 Basic operation (to be continued) Parent Control In “Function” menu, press Arrow button to select “Parent Control”,press Arrow to enter the input password menu. Input the password to enter the submenu(the default password is 0000 and omnipotent password is 1980). PICTURE AUDIO SETTING...
  • Page 19 Basic operation (to be continued) Channel Input 1.Press Arrow button to select "CHANNEL INPUT" function. 2.Input the channel number you want to lock and press OK key to confirm,the channel number will be add to the list below. 3.If you want to unlock a channel, press Arrow button to select the channel number in the list and press OK key to delete it.
  • Page 20 Basic operation (to be continued) 2.Window This TV supports no higher than 60Hz under PC mode, so please set the refresh rate of PC to 60Hz. If the frequency is higher than 60Hz, the screen may flicker. When the TV is in PC mode, press MENU button on the remote control. Press Arrow button to select “WINDOW”.
  • Page 21: External Connection

    External connection Antenna connection Antenna input impedance of this unit is 75ohm. VHF/UHF 75ohm coaxial cable can be connected to the antenna jack directly, if the antenna cable is a 300ohm flat feeder cable, you need to use the 300ohm/75ohm converter (not included) to con- nect the antenna cable to the antenna jack.
  • Page 22 External connection 2. How to assemble the stand? Before attaching/detaching the stand, make sure to turn off the TV. efore performing work spread cushioning over the base area to lay the LCD-LED TV on. This will prevent it form being damaged. Screws(5-M4X10) Figure 1 Figure 2...
  • Page 23: Trouble Shooting

    Trouble shooting If you have any problem, check the countermeasure for each symptom listed below. The following symptoms may have caused by inappropriate adjustment rather than actual malfunction of the unit. If the trouble persists, contact the service center. Problem Possible Solution Try another channel.
  • Page 24: Picture Defects And Countermeasures

    Picture defects and countermeasures The most common types of television interference are as following: SNOWY PICTURE Snowy picture is usually caused due to weak signal. Adjust antenna or install an antenna amplifier. DOUBLE IMAGES OR “GHOSTS” Double images are usually caused by reflections from tall buildings.
  • Page 25 39037256...
  • Page 26 LCD-LED TV User Manual LE32W131 www.aoc.com...
  • Page 27 KL32NS18U 39037256 装订方式:英、西顺序装订,英文在前,西文在后;英、西交接处 装订不需要封底封面。...