AOC LE32W131 User Manual page 20

Basic operation (to be continued)
2.Window
This TV supports no higher than 60Hz under PC mode, so please set the refresh
rate of PC to 60Hz. If the frequency is higher than 60Hz, the screen may flicker.
When the TV is in PC mode, press MENU button on the remote control. Press
Arrow button to select "WINDOW".
PICTURE AUDIO SETTING
H-POSITION
V-POSITION
CLOCK
PHASE
AUTO ADJUST
ADJUST
1) Adjusting picture H-Position
Arrow button to select "H-POSITION" and press
q p
Press /
set horizontal position of picture.
2) Adjusting picture V-Position
Arrow button to select "V-POSITION" and press
q p
Press /
set vertical position of picture.
3) Adjusting Clock
When PC is connected to TV set because of the difference of PC parameter,you
should adjust the "CLOCK" item in "WINDOW" menu until you get a good picture.
4) Adjusting Phase
When PC is connected to TV set because of the difference of PC parameter,you
should adjust the "PHASE" item in "WINDOW" menu until you get a good picture.
5) Auto Adjust
If there are unexpected problems happened when you adjust the items, you can
select the "AUTO ADJUST" and press
original settings.
Note: Only "H-Position" and "V-Position" are available for YPBPR mode.
20
FUNCTION WINDOW
100
100
100
0
SELECT EXIT
MENU
PICTURE AUDIO SETTING
H-POSITION
V-POSITION
ADJUST SELECT
u
Arrow button, the TV set will resume the
t u
/
FUNCTION WINDOW
100
100
MENU EXIT
t u
/ Arrow button to
t u
/ Arrow button to