Installing The Cooktop Unit - GE JGP337 Owner's Manual

Installation Instructions
B

Installing the Cooktop Unit

Protect the Surface
B1
of the Cooktop
Place a towel or tablecloth onto the countertop.
Lay the cooktop upside down onto the protected
surface.
Locate The Mounting Parts
B2
Remove the hold down
brackets from the
literature package.
Attach the Adhesive Strip
B3
(Glass Top Models Only)
Attach the adhesive strip around the maintop
glass as close to the edge as possible.
Cooktop
Burner
Box
Attach Brackets
B4
Insert the hold down
brackets in the slots on
each side of the unit.
Bottom of cooktop
Cloth under Cooktop
Outer edge
of glass bottom
Adhesive Strips
to outer edge
of glass
Countertop
Mounting
Slot
Insert Cooktop Into Cutout
B5
Insert the cooktop centered into the cutout
opening. Make sure the front edge of the
countertop is parallel to the cooktop. The unit
must rest on the metal flange around the
burner box. Make final check that all required
clearances are met.
Secure Cooktop to Cabinet
B6
Once the unit is in place, screw the hold
down bracket into the cabinet sides to secure
the unit into place.
Burner Box
Sides
Cabinet
Sides
19
COOKTOP
Mounting
Slot
Burner Box
Sides
Use suitable
fasteners for
anchoring in
cabinet sides