Step 2 - Optical Digital Installation - TV Ears 5.0 User Manual

Step 2 - Optical Digital Installation

This step will instruct you on how to connect the TV Ears
transmitter to your television, satellite, or cable box using an
optical digital audio cord.
• If you cannot get to the back of your TV, you can also use these
instructions to install the system to your cable or satellite box.
• Be aware that the "Audio" ports on the front of your television are
typically "Audio In" ports and will not send audio to your speaker.
1
Remove the plastic caps from both ends of the optical digital
audio cord.
2
Plug either end of the optical audio cord into the "Digital
Audio Out (Optical)" port on the back of the TV.
3
Plug the other end of the optical digital audio cord into the
port on the back of the transmitter labeled "Digital Audio
In". The correct port has a green border around it. You should
hear and feel a 'click' when it has been pushed in all the way.
Digital Audio
For assistance, call us at 866-611-9934
Optical
9