Fog Lamp Control; High Beams; Flash-To-Pass - Ford Escape Owner's Manual

Lights
3. Rotate the headlamp control to the off position.
4. Turn the vehicle on.
5. Turn the vehicle off.
6. Turn the headlamp control to the autolamp position (the headlights
should turn on).
7. Turn the headlamp control to the off position when the desired delay
time (up to three minutes) has been reached.
Fog lamp control (if equipped)
The headlamp control also operates
the fog lamps. The fog lamps can be
turned on when the headlamp
control is in the
positions and the high beams are
not turned on.
Pull the headlamp control towards
you to turn the fog lamps on. The
fog lamp indicator light will
illuminate.

High beams

• Push the lever toward the
instrument panel to activate.
• Pull the lever toward you to
deactivate.

Flash-to-pass

Pull toward you slightly to activate
and release to deactivate.
54
2012 Escape (204)
Owners Guide, 1st Printing
USA (fus)
, or