115V / 230V Ac Mains Voltage - Parasound Zdac Owner's Manual

AC Voltage Selection
Check the 115V/230V Voltage switch before plugging in the Zdac's AC power cord!
Make sure the 115V/230V Voltage Selector switch on the Zdac's bottom side is set for the correct
AC line (mains) voltage before you plug in the Zdac's power cord. The unit can be seriously
damaged if this switch is set incorrectly for your AC mains voltage.
In the 115V position the Zdac can safely operate with AC Line voltages between 110V-120V which is
correct for North America, including Mexico, and also in Taiwan. In some countries, such as Brazil, AC
voltages are different by region. Most other countries require setting it to 230V. With the 230V setting
the Zdac can operate safely with AC line voltages between 220V-240V.
If you are not certain of your local AC voltage call your dealer. The following website will also be helpful:
http://en.wikipedia.org/wiki/Mains_electricity_by_country#Voltage_ranges
Note: A Zdac that has been damaged by connection to the incorrect AC voltage is not covered
by the Parasound warranty.
5
(Zdac Bottom)