Specifications - Parasound Zdac Owner's Manual

Specifications and Details
Supports Incoming Digital Word Lengths:
Supports Incoming Digital Sampling Frequencies:
Opt & Coax: 8 kHz, 11.025 kHz, 16 kHz, 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz.
USB: 44.1 kHz, 48 kHz, 88.2 kHz and 96 kHz
USB Streaming Controller:
Upsampling Frequency:
Sample Rate Converter:
D to A Converter:
Analog Devices AD1853
Frequency Response:
Channel Balance:
< 0.05 dB, 20 Hz - 20 kHz
Channel Separation:
Signal to Noise Ratio:
THD + Noise:
< 0.015 %
Audio Output Level:
Unbalanced: 2.1 V rms
Balanced: 4.2 V rms
Output Impedance:
Line out: 160 ohms, balanced or unbalanced
Headphone out: 10 ohms
AC Power Requirement:
110-130 VAC 60 Hz
220-240 VAC 50 Hz, voltage is selected on the chassis bottom
Dimensions:
Width: 9.5" - 241 mm (black); 8.5" - 220 mm (silver)
Depth: 10" - 254 mm
Height, with feet: 2" - 51 mm; without feet:1.75" - 45 mm
Weight:
Net: 5 lbs (2.3kg)
Shipping: 8 lbs (3.7kg)
Rack Mount Accessory (Black Zdac only):
SBS: Side by Side Mounting bracket, purchased separately
Zblank: Panel extender, purchased separately
(Silver Zdacs cannot be rack mounted)
Specifications and features subject to change or improvement without notice.
Texas Instruments TAS1020B
422 kHz / 24 bit (all inputs)
Analog Devices AD1895
20 Hz to 20 kHz ±0.2 dB
> 95 dB, 20 Hz - 20 kHz
110 dB, A-weighted
10 watts
16 bit - 24 bit
12
Rev 1.1, Copyright 2013