General Messages
SHIFT TO PARK
STEERING LOCK
TURN WHEEL TO
UNLOCK
Keys and Intelligent
Access Messages
NO KEY DETECTED Displayed if the intelligent access key is not
KEY PROGRAMMED
3 KEYS TOTAL
KEY PROGRAMMED
4 KEYS TOTAL
MAX NUMBER OF
KEYS LEARNED
PRESS BRAKE TO
START
2012 Edge (edg)
Owners Guide, 1st Printing
USA (fus)
Instrument Cluster
Action / Description
Displayed when the engine is turned off with
the shift select lever in any position other than
P (Park).
Displays when you need to turn the steering
wheel in order to disengage the steering lock.
Action / Description
detected by the system in the following three
scenarios:
•When the start/stop button is pressed in an
attempt to either start the engine or cycle
through the ignition states.
•When the engine is running and a door is
opened then closed.
•When the vehicle's speed exceeds 10 mph
(16 km/h) for the first time after starting.
Refer to Push button start system in the
Driving chapter for more information.
Displayed during spare key programming,
when a third intelligent access key is
programmed to the system.
Displayed during spare key programming,
when a fourth intelligent access key is
programmed to the system.
Displayed during spare key programming when
the maximum number of keys have been
programmed.
Displayed when the start/stop button is
pressed without the brake pedal being applied.
This is a reminder that the brake pedal must
be applied when the start/stop button is
pressed in order to start the engine. Refer to
Push button start system in the Driving
chapter for more information.
41