Ford Edge Owner's Manual page 119

Note: For all vehicles with a non Ford-approved remote start installed, it
is possible to program all 'real' keys as MyKeys , in which case, you will
need to use your remote start system to reset all MyKeys as admin keys
by doing the following:
1. Enter the vehicle, close all doors.
2. Remote start the vehicle using your non Ford-approved remote start
fob.
3. Follow Steps 1-4 in the Clear MyKey section.
Troubleshooting
Condition Potential Causes
• Key in the ignition is already a MyKey .
Can't create a
• Key in the ignition is the last remaining admin key
MyKey
(there always has to be at least one admin key).
• Intelligent access key (if equipped) is not in the
backup slot (for vehicles with push button start).
• SecuriLock passive anti-theft system is disabled
or in unlimited mode.
• Vehicle has been started using a non
Ford-approved remote start system that is
programmed as MyKey . Refer to Using MyKey
with remote start systems section.
• Key in the ignition is a MyKey .
Cannot program
• No MyKeys are programmed to the vehicle.
the MyKey
optional settings Refer to Create a MyKey section.
• Vehicle has been started using a non
Ford-approved remote start system that is
programmed as MyKey . Refer to Using MyKey
with remote start systems section.
• Key in the ignition is a MyKey .
Cannot clear
• No MyKeys are programmed to the vehicle.
MyKey
Refer to Create a MyKey section.
• Vehicle has been started using a non
Ford-approved remote start system that is
programmed as MyKey . Refer to Using MyKey
with remote start systems section.
• Purchase a new key from your authorized dealer.
Lost the only
admin key
2012 Edge (edg)
Owners Guide, 1st Printing
USA (fus)
Locks and Security
119