Ford Edge Owner's Manual page 193

192
Brake-shift interlock
WARNING: Do not drive your vehicle until you verify that the
brake lamps are working.
WARNING: When doing this procedure, you will be taking the
vehicle out of park which means the vehicle can roll freely. To
avoid unwanted vehicle movement, always fully set the parking brake
prior to doing this procedure. Use wheel chocks if appropriate.
WARNING: If the parking brake is fully released, but the brake
warning lamp remains illuminated, the brakes may not be
working properly. See your authorized dealer.
Use the BSI lever to move the gearshift lever from the park position in
the event of an electrical malfunction or if your vehicle has a dead
battery.
Apply the parking brake and turn the ignition off before performing this
procedure.
2. Locate the brake shift interlock lever in front of the
shifter assembly.
2013 Edge (edg)
Owners Guide gf, 3rd Printing
USA (fus)
Transmission
1. Using a screwdriver (or similar tool),
carefully pry off and remove the BSI
access panel.