Software Update; Disclaimer - Boox i62 User Manual

Hide thumbs Also See for Boox i62:

Table of Contents

www.onyx-international.com

Charge without interruption for specified time.

NOTE! Before first use and if battery is exhausted (last screen on) we advice

to charge the device for up to 10 hours.

Software Update

You can update the software by follow steps:



Download the latest updates package from onyx-boox.com



Please make sure you have the right firmware for right i62 edition. In case

ask

support@onyx-boox.com



Save the updates package in a TF card.



Make sure the updates package is located at the root directory of the TF

card. The name should be 'onyx_update.zip' or such.



Insert the TF card into device.



Restart device, press and hold the Back button. NOTE, the Back button

should be pressed before the device restarts. Hold it until you see the

message 'Software update request detected, checking updates...'

Device updates itself automatically. It restarts after update finishes.

Note: Make sure device has enough power to finish the software update (at

least 2 grids displayed) or is plugged to power source.

We make every effort to ensure that the information and procedures in this

user manual are accurate and complete. No liability can and will be accepted

for any errors or omissions. ONYX reserves the right to make any changes

without further notice to any products herein.

__________________________________________________________________________________________________________________

if the update is the right one for you.

36 / 36

Table of Contents