Table of Contents
Advertisement
EUB9706 –300Mbps Wireless N USB Adapter
Authentication Type: Select TTLS from the drop-down list.
Protocol: Select EAP-MSCHAP v2, MS-CHAP, or CHAP from the drop-
down list.
Identity: Enter the user name.
Password: Enter the password.
Click on the OK button to save the changes.
802.1x CA Server
Depending on the EAP in use, only the server or both the server and client may
be authenticated and require a certificate. Server certificates identify a server,
usually an authentication or RADIUS server to clients. Most EAPs require a
certificate issued by a root authority or a trusted commercial Certificate Authority.
Use certificate chain: Place a check in this to enable the certificate use.
Certificate issuer: Select the Certification Authority from the drop-down list.
Allow intermediate certificates: During tunnel creation the client must
verify the server's certificate. When checking this certificate the signature
is verified against a list of trusted certificate authorities. If this parameter is
true then the client will also accept a signature from a trusted intermediate
certificate authority, otherwise it will not.
Version 1.0
19
Advertisement
Table of Contents
