Wireless; Wireless Network; Wireless Security - Wep - EnGenius EOC-2610 User Manual

Long Range Wireless Access Point / Client Bridge

Wireless

Wireless Network

The Wireless Network page allows you to configure the wireless mode, channel,
SSID, and security settings.
Wireless Mode: Depending on the type of wireless clients that are connected to the
network, you may select B, G, B/G-mixed or Super-G. If you are not sure about
which clients will be accessing the wireless networks, it is recommended that you
select B/G-mixed for the best performance.
Super-G is a proprietary mode which combines all channels into a single channel to
maximize the through-put up to 200%. Please be aware that Super-G works only with
other Super-G supported devices.
Channel: Select a channel from the drop-down list. The channels available are
based on the country's regulation. When selecting Infrastructure mode, a channel is
not required, however, when selecting Adhoc mode, you must select the same
channel on all points.

Wireless Security - WEP

Security Mode: Select WEP from the drop-down list if your wireless network uses
WEP encryption. WEP is an acronym for Wired Equivalent Privacy, and is a security
Click on the Wireless link on the navigation
drop-down menu. You will then see four
options: wireless network, wireless MAC filter,
WDS link settings, and wireless advanced
settings. Each option is described below.
Version 1.0
18