Connecting To A Pc; Starting The Software - Bosch PLN-6TMW Installation And User Instructions Manual

Plena Weekly Timer | Installation and User Instructions | Configuration software
8.4

Connecting to a PC

The supplied USB cable can be used to connect a PC to
the Plena Weekly Timer (see figure 8.7). It is not
necessary to switch the Timer off.
Note
The configuration software can be also used
when the PC is not connected to the Timer, for
example, to program a new schedule at home.
figure 8.7: Connecting a PC to the Timer
Note
Make sure you disconnect the USB cable from
the Timer after uploading or downloading data.
If you do not disconnect the USB cable, the
performance of the Timer might be affected.
Bosch Security Systems | 2006-05 | 9922 141 50741 en
8.5

Starting the software

Proceed as follows:
1 Go to the desktop of Windows (see figure 8.8 for an
example).
figure 8.8: Windows desktop
2 Double-click the Plena Weekly Timer Configuration
icon. A window similar to the one in figure 8.9 will
appear.
figure 8.9: Password
3 Enter the password (12345678) in the Enter password
field, and click the OK button. The main menu will
appear (see figure 8.10).
Note
The default password 12345678 can be
changed in the configuration software
(see section 8.6.5).
en | 29