Viewing And Editing Events - Bosch PLN-6TMW Installation And User Instructions Manual

Plena Weekly Timer | Installation and User Instructions | Programming a schedule
7.3

Viewing and editing events

Note
Once you have pressed the rotary selector to
either "confirm a new event" or "edit an existing
one", you will have to continue programming
that event. You cannot return to previous events
in any one programming session.
To view or edit an event, first follow steps 1 through 7 of
section 7.2. When the event symbol starts to flash, you
can either:
• turn the rotary selector to select other previously
programmed events, and then press the rotary
selector to continue editing that event as further
described in section 7.2.
• press the Pause button to delete the entry. After a few
seconds the full display will re-appear and the word
RUN will be displayed in the top left-hand corner.
This indicates that editing of the event is complete,
and that the Timer is running.
• press the rotary selector to confirm the new event as
described in step 8 of section 7.2.
Bosch Security Systems | 2006-05 | 9922 141 50741 en
en | 26