Canon EOS 5D Instruction Manual page 194

3 Custom Function SettingsN
C.Fn I -5
The AEB shooting sequence and white balance bracketing sequence can
be changed.
0: 0, -, +
1: -, 0, +
AEB
0 : Standard exposure
- : Decreased exposure - : Blue bias
+ : Increased exposure + : Amber bias
C.Fn I -6
0: Disable
1: Enable (Tv/Av)
This works in the shutter-priority AE (s) and aperture-priority AE (f)
modes. When the subject's brightness changes erratically and the
correct auto exposure cannot be obtained, the camera will change the
exposure setting automatically to obtain a correct exposure.
C.Fn I -7
0: Auto
1: 1/200-1/60 sec. auto
When flash is used with aperture-priority AE (f), this prevents a slow
flash-sync speed from being used in low-light conditions. Effective for
preventing subject blur and camera shake. The only problem is that,
while the subject will be properly exposed with the flash, the background
will come out dark.
2: 1/200 sec. (fixed)
The flash-sync speed is fixed to 1/200 sec. This better prevents subject
blur and camera shake than with setting 1. However, the background will
come out darker than with setting 1.
194
Bracketing sequence
B/A Direction
0 : Standard white balance 0 : Standard white balance
Safety shift
Flash sync. speed in Av mode
WB Bracketing
M/G Direction
- : Magenta bias
+ : Green bias