Advertisement
In order to strengthen the connection of cartridges and the printer head, prevent
air leaking, ink back flowing, ink leaking, we need to add a silicon seal on cartridge
nozzle, the processed are as follows:
1. Clean the seal: Take out 20*20 sponge sticker and seals, tear off the sticker
cover, put seal on the sticker to wipe off the dirt (double sides should be cleaned) (1-
1).
2. Take the printer head out: turn the printer on, open the printer's cover,
cartridge holder will move to the cartridge change position, take cartridges out (2-1),
lift printer head lock balance (2-2), then you can take out the printer head, place the
printer head on clean paper (2-3) to prevent damage, do not touch the electronic panel.
Pic. 2-1
3. Install the silicon seal: check if the original seal and filter have dirt (3-1), if
yes, please clean them, then use pliers to install the silicon seal on the printer head
according to the shape (3-2), and check if all seals are in the right position (3-3).
Pic. 3-1
8
INSTALLATION MANUAL ON CISS FOR PRINTER CANON IX 4000/IP 4200
Install Nozzle Seal for BCI – 24BK
Pic. 1-1
Pic. 2-2
Pic. 3-2
Pic. 2-3
Pic. 3-3
Advertisement
