GE 29115 Series User Manual page 37

NOTE: If you select Toll Saver (TS) the unit
answers after the 3rd ring if there are NEW
messages, OR the unit answers after the 5th
ring if there are NO new messages. This allows
user to access their answerer from another
location and then hang up after 4 rings to save
long distance charges.
Security Code (for answering system)
You can access the answering system from a tone dialing
telephone in another (remote) location. The security code
is required for remote access, and it prevents unauthorized
access to your answering system.
From the Handset Setup Menu:
1. Press the caller ID-volume ( 5 or 6) button to scroll to the
SECURITY CODE sub-menu.
. Press mute/program button to enter the menu. SECURITY
CODE 1 2 3 shows in the display.
. Use the touch-tone pad to enter your new -digit security
code. The default setting is 123.
. Press the mute/program button to confirm. You will hear a
confirmation tone and the new security code shows in the
display.
NOTE: If you make a mistake, use the delete
button to delete the security code and begin
again.
7