Local Area Code; Registration; Default Setting - GE 27958 User Manual

6. Press FLASH/PROGRAM again to store your selection.
L A C
OCAL REA
NOTE: This setting may be made with the base or the cordless handset.
1. Press the FLASH/PROGRAM button until SET AREA CODE - - - or AREA
CODE - - - shows in the display. - - - is the default setting.
2. Use the cordless handset or base number pad to enter your three digit
area code.
3. Press FLASH/PROGRAM again to store your selection.
NOTE: You can press FLASH/PROGRAM at any time to go to the next option.
R
EGISTRATION
Registration links the base to a cordless handset. Once a handset is
registered it can use the base's phone connection. A cordless handset will
not operate until it is registered to the base. During the registration
process, keep the handset near the base.
1. Press the FLASH/PROGRAM button on the base until LINK HANDSET
shows in the display. 2NO is the default setting.
2. Press the 1 number key or press the MESSAGES/CID (
on the base to scroll to 1YES .
3. Press FLASH/PROGRAM on the base to confirm handset is linked to the
base. WAITING HANDSET REGISTRATION shows in the display.
4. Press the flash/program button on the handset until LINK BASE? shows
in the display. NO is the default setting.
5. Press cid/vol (
6. Press flash/program on the handset again to confirm. You will hear a long
confirmation tone when the handset is successfully linked to the base.
D S
EFAULT ETTING
1. Press the FLASH/PROGRAM button until DEFAULT SETTING or DEFAULT
shows in the display. 2NO is the default setting.
ODE
(L C
INK ORDLESS
or ) button on the handset to scroll to YES .
H )
ANDSET
or ) button
15