Ignals; Guide - GE 27958 User Manual

REPT
NO DATA
WAITING HANDSET
REGISTRATION
NO BATTERY
H S
ANDSET OUND
Signal
A long warbling tone (with ringer on)
Three short beeps
One short beep (every 7 seconds)
T
ROUBLESHOOTING
T S
ELEPHONE OLUTIONS
No dial tone
• Check and repeat installation steps:
Ensure the base power cord is connected to a working outlet .
Ensure the telephone line cord is connected to the base and the wall jack .
• Connect another phone to the same jack; if there is still no dial tone, the
problem might be your wiring or local service.
• The cordless handset may be out of range of the base. Move closer to
the base.
• Ensure the battery is properly charged (12 hours).
• Ensure the battery pack installed correctly.
40
Repeat call message. Indicates that a new call
from the same number was received more
than once.
No Caller ID information was received.
Prompt telling you to enter registration mode
of handset
No battery is installed in the handset or the
battery is not properly connected to the battery
jack inside the battery compartment.
S

IGNALS

G
UIDE
Meaning
Signals an incoming call
Page signal
Low battery warning