Table of Contents
Advertisement
e. Status LED
SITUATION
LED
Analog standby
Off
Digital standby
Green
Analog transmit
Red
Digital transmit
Orange
Digital receive
Green blinking
f. Synchronization push button
Enables the re-synchronization of digital reception if synchronization is lost
during a communication session.
g. Power / volume knob
Only applicable for DIGITAL reception.
Adjustment for speaker/headphone output level, as well as for the speaker
output on the rear panel. Turning the knob fully counterclockwise, switches
the unit off.
At ANALOG reception, the audio is bypassed directly to the speaker, and the
volume level has to be adjusted with the transceiver s volume control. As long
as the ARD9000 is powered on, even if the volume knob is turned fully
counterclockwise, audio output from the transceiver is bypassed to the
ARD9000 speaker.
Rear Panel
h. DC IN Connector (EIAJ Type 4)
Using the supplied DC power cable, connect to your regulated power supply
(10~16V DC, center pin ? positive). We strongly recommend to use the
separated power unit from that of transceiver.
Advertisement
Table of Contents
