Uconnect® Voice Command - Chrysler 200 User Manual

E L E C T R O N I C S
Mute (Or Unmute) Microphone During Call
• During a call, press the "Voice Command" button
• After the BEEP, say "mute" (or "mute off").
Transfer Ongoing Call Between Handset And Vehicle
• During a call, press the "Voice Command" button
• After the BEEP, say "transfer call".
Changing The Volume
• Start a dialogue by pressing the "Phone" button
call.
• Use the radio ON/OFF VOLUME rotary knob to adjust the volume to a comfortable level
while the Uconnect® system is speaking. Please note the volume setting for Uconnect® is
different than the audio system.
• Any voice commanded system should be used only in safe driving conditions following
applicable laws regarding phone use. Your attention should be focused on safely operating
the vehicle. Failure to do so may result in a collision causing you and others to be severely
injured or killed.
• In an emergency, to use Uconnect® Phone, your mobile phone must be:
• turned on,
• paired to Uconnect® Phone,
• and have network coverage.
Uconnect® VOICE COMMAND
Voice Command Operation
• The Uconnect® Voice Command system allows you to control your AM, FM radio, satellite radio,
disc player, HDD, Uconnect® Phone, a memo recorder, and supported portable media devices.
• When you press the "Voice Command" button
steering wheel, you will hear a beep. The beep is your signal to give a command. If you do not
say a command within a few seconds, the system will present you with a list of options. If you
ever wish to interrupt the system while it lists options, press the "Voice Command" button
, listen for the BEEP, and say your command.
NOTE:
Visit http://www.driveuconnect.com/features/voiceCommand/ for more info on which voice
command features apply to your vehicle.
58
, then adjust the volume during a normal
WARNING!
.
.
located on the radio faceplate or