Battery Location; Jump-Starting - Chrysler 200 User Manual

2012
Hide thumbs Also See for 200:
Table of Contents

Advertisement

WHAT TO DO IN EMERGENCIES

BATTERY LOCATION

JUMP-STARTING

• If your vehicle has a discharged battery it can be jump-started using a set of jumper
cables and a battery in another vehicle or by using a portable battery booster pack.
Jump-starting can be dangerous if done improperly so please follow the procedures in
this section carefully.
When using a portable battery booster pack follow the manufacturer's operating
NOTE:
instructions and precautions.
Preparations For Jump-Start
• The battery in your vehicle is located between the left front headlight assembly and the
left front wheel splash shield. To allow jump-starting there are remote battery posts
located on the left side of the engine compartment.
76
• The battery in your vehicle is located
between the left front headlight assembly
and the left front wheel splash shield. To
allow jump-starting there are remote
battery posts located on the left side of
the engine compartment.
1. Set the parking brake, shift the automatic
transmission into PARK and turn the
ignition to LOCK.
2. Turn off the heater, radio, and all
unnecessary electrical accessories.
3. Remove the protective cover over the
remote positive (+)
remove the cover, press the locking tab and
pull upward on the cover.
4. If using another vehicle to jump-start the
battery, park the vehicle within the
jumper cables reach, set the parking
brake and make sure the ignition is OFF.
battery post. To

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

200 2012

Table of Contents