Bulb Specification Chart - Ford Escape Owner's Manual

6. Remove the turn signal bulb or the tail
and brake bulb by turning the bulb
socket counterclockwise. Gently pull
the bulb straight out of the socket.
Install the new bulb in reverse order.
Replacing Reverse Lamp Assembly
For bulb replacement, see your authorized
dealer.
Replacing License Plate Lamp Bulb
3
E72789
1. Carefully release the spring clip.
Function
Headlamps high beam (Halogen)
* Headlamps high beam (HID)
Headlamp low beam (Halogen)
* Headlamp low beam (HID)
Sidemarker - front
Park lamp - front (HI Series)
Park lamp - front (Low Series)
Turn lamp - front (HI Series)
Turn lamp - front (Low Series)
Fog lamps
Tail/brake lamp
Maintenance
2. Remove the lamp.
3. Remove the bulb.
Reverse steps to reinstall bulb.
Replacing High-Mount Brake Lamp
Bulb
Your vehicle is equipped with an LED
center high-mount stop lamp located in
the spoiler. It is designed to last the life of
the vehicle. If replacement is required, see
your authorized dealer.

BULB SPECIFICATION CHART

2
Replacement bulbs are specified in the
chart below. Headlamp bulbs must be
marked with an authorized "D.O.T." for
1
North America to ensure lamp
performance, light brightness and pattern
and safe visibility. The correct bulbs will
not damage the lamp assembly or void the
lamp assembly warranty and will provide
quality bulb burn time.
240
Trade number
9005LL
H1
H11LL
D3S
168
WY5W
194
WY21W
W21W
H10 (9145)
3157K