Memory Function; Saving A Pre-Set Position; Saving A Passive Setting; Recalling A Stored Seat Position - Ford Escape Owner's Manual

Power Lumbar
(If Equipped)
E138648

MEMORY FUNCTION

WARNINGS
Before activating the seat memory,
make sure that the area immediately
surrounding the seat is clear of
obstructions and that all occupants are
clear of moving parts.
Do not use the memory function
when your vehicle is moving.
This feature will automatically recall the
position of the driver's seat and power
mirrors. The memory control is located on
the driver's door.
E142554
Seats

Saving a Pre-Set Position

1.
2. Adjust the seat and exterior mirrors to
3. Press and hold the desired pre-set
Recalling a Pre-Set Position
Press the pre-set button associated with
your desired driving position. The seat and
mirrors will move to the position stored for
that pre-set.

Saving a Passive Setting

The vehicle stores the seating and mirror
positions for up to three remote controls
(IF EQUIPPED)
or passive keys. Next time the vehicle is
unlocked, the position of the seat and
mirrors will adjust to the last used position.
Each time you turn the ignition off, the
current seat and mirror settings are stored
on the remote control or passive key used.

Recalling a Stored Seat Position

Note: Press any driver seat adjustment
control, any of the memory buttons or any
mirror control switch, to stop seat
movement during a recall. Seat movement
will also stop if you move the vehicle.
Passive Recall
Note: If more than one passive key is in
range, the memory function will move to the
settings of the first key stored.
When you unlock the vehicle with the
remote control or pull the driver door
handle with a passive key in range, the seat
and mirrors will move to the position stored
on that remote control or passive key.
129
Switch the ignition on.
your desired position.
button until you hear a single chime.