BMW Z4 sDrive28i Owner's Manual page 67

indicates that Check Control messages have
been stored. You can view the Check Control
messages whenever it is convenient for you.
What to do in case of a malfunction
The meaning of each lamp in the event of a mal‐
function and tips on how to respond are pro‐
vided in the list, refer to page 186.
Hiding Check Control messages
Press the button in the turn indicator lever.
Some Check Control messages are displayed
until the malfunctions have been rectified. They
cannot be hidden. If several malfunctions occur
at the same time, they are displayed in succes‐
sion.
Other messages are automatically hidden after
approx. 20 seconds, but are kept in memory.
Online Edition for Part no. 01 40 2 609 184 - 09 11 500
Displays
Viewing stored Check Control
messages
1. Press button 1 in the turn indicator lever up
or down repeatedly until the appropriate
symbol appears in the display, accompanied
by the words "CHECK CONTROL".
2. Press button 2. If there is no Check Control
message, this is indicated by "CHECK OK".
If a Check Control message has been
stored, the corresponding lamp comes on.
3. Press button 1 to check for other messages.
4. Press button 2.
The display again shows the external tem‐
perature and the time.
Messages after trip completion
Special messages that were displayed during a
trip are displayed again after the ignition is
switched off.
Controls
67