ZyXEL Communications UAG4100 User Manual page 96

Chapter 8 Wireless
Table 47 Configuration > Wireless > AP Management > Edit AP List (continued)
LABEL
Model
Description
Radio 1/2 OP Mode
Radio 1/2 Profile
Force Overwrite
VLAN Config
Management VLAN
ID
As Native VLAN
OK
Cancel
96
DESCRIPTION
This field displays the AP's hardware model information. It displays N/A (not
applicable) only when the AP disconnects from the UAG and the information is
unavailable as a result.
Enter a description for this AP. You can use up to 31 characters, spaces and underscores
allowed.
Select the operating mode for radio 1 or radio 2.
AP Mode means the AP can receive connections from wireless clients and pass their
data traffic through to the UAG to be managed (or subsequently passed on to an
upstream gateway for managing).
Select a profile from the list. If no profile exists, you can create a new one through the
Create new Object menu.
Select this to have the UAG change the AP's management VLAN to match the
configuration in this screen.
Enter a VLAN ID for this AP.
Select this option to treat this VLAN ID as a VLAN created on the UAG and not one
assigned to it from outside the network.
Click OK to save your changes back to the UAG.
Click Cancel to close the window with changes unsaved.
UAG4100 User's Guide