Status
Eye-Fi Endless Memory
is not working.
Eye-Fi Card gets warm.
Camera battery life is
shorter.
Transferring pictures is
slow using the Eye-Fi
Card.
Direct printing (PICTBRIDGE enabled printer)
problems
Status
Cannot find the
desired picture.
The Direct printing
menu interface turns
off.
Cannot print pictures.
Camera or printer
displays an error
message.
www.kodak.com/go/support
Solution
CAUTION:
If you're using an Eye-Fi Card in this camera,
it's critical that you disable (don't turn on)
Endless Memory Mode in Eye-Fi Center
Software.
■
This is normal.
■
Battery life is reduced when using an Eye-Fi Card.
■
For the best reception when transferring pictures to a computer
or mobile device, the rear (LCD side) of the camera should face
the Wi-Fi access point.
Solution
■
Use the Direct printing menu to change the image storage location.
■
Press any camera button to redisplay the menu.
■
Make sure there is a connection between the camera and the
printer
(see page
■
Make sure the printer and the camera have power.
■
Follow the prompts to resolve the issue.
48).
Troubleshooting
57