Advertisement
Laney
INTRODUCTION
Congratulations on your decision to purchase a LaneyTube Fusion amplifier.
Laney products are designed with ease of operation as a primary objective, however to ensure you derive the
best from your new amplifier, it is important you take time to read this user manual and to familiarise yourself
with the control functions and facilities available.
BEFORE SWITCHING ON
After unpacking your amplifier check that it is factory fitted with a three pin 'grounded' (or earthed) plug. Before
plugging into the power supply ensure you are connecting to a grounded earth outlet.
If you should wish to change the factory fitted plug yourself, ensure that the wiring convention applicable to the
country where the amplifier is to be used is strictly conformed to. As an example in the United Kingdom the
cable colour code for connections are as follows.
EARTH OR GROUND - GREEN/YELLOW
NEUTRAL - BLUE
LIVE - BROWN
This manual has been written for easy access of information. The front and rear panels of each unit are graphically
illustrated, with each control and feature numbered. For a description of the function of each control feature,
simply check the number with the explanations adjacent to each panel.
Your Laney amplifier has undergone a thorough two stage,pre-delivery inspection,involving actual play testing,as
well as burn in.
When you first receive your LaneyTube Fusioin amp,follow these simple procedures:
(i) Ensure that the amplifier is set at the correct voltage for the country it is to be used in.
(Ii) Connect your instrument with a high quality shielded instrument cable. Use of cheap cables will compromise
the sound of your instrument and your amplifier.
Care of your Laney amplifier will prolong it's life.....and yours!.
OPERATING INSTRUCTIONS
Eng
Page 2
Advertisement
