Introduction; Before Switching On - Laney Tube Fusion User Manual

Introduction

Congratulations on your decision to purchase a new Laney TUBE FUSION amplifier.
Laney products are designed with ease of operation as a primary objective, however to ensure you derive the best from your new amplifier, it is important you
take time to read this user manual and to familiarise yourself with the control functions and facilities available

Before switching on

After unpacking your amplifier check that it is factory fitted with a three pin 'grounded' (or earthed) plug. Before plugging into the power supply ensure you are
connecting to a grounded earth outlet.
If you should wish to change the factory fitted plug yourself, ensure that the wiring convention applicable to the country where the amplifier is to be used is
strictly conformed to. As an example in the United Kingdom the cable colour code for connections are as follows:
This manual has been written for easy access of information. The front and rear panels of each unit are graphically illustrated, with each control and feature
numbered. For a description of the function of each control feature, simply check the number with the explanations adjacent to each panel.
Your Laney Tube Fusion amplifier has undergone a thorough two stage, pre-delivery inspection, involving actual play testing, as well as tube burn-in. Tubes are
the one of the most important component in your Laney Tube Fusion amp. A tube has a life-span of approximately two years. After this approximate length of
time a tube may begin to wear out, at which point it should be replaced. If you are unfamiliar with tube replacement, this is best carried out by a qualified
service engineer.
When you first receive your Laney Tube Fusion amp, follow these simple procedures:
1. Ensure that the amplifier is set at the correct voltage for the country within which it is to be used.
2. Ensure that the speaker is connected to the appropriate socket.
3. Connect your instrument with a high quality shielded instrument cable. Use of cheap cables will compromise both the sound of your instrument and y o u r
amplifier.
If there is a problem with your Laney Tube Fusion...
DON'T
Care of your Laney amplifier will prolong it's life...and yours! If you follow these guidelines your equipment will give you years of playing pleasure.
EARTH OR GROUND - GREEN/YELLOW
NEUTRAL - BLUE
LIVE - BROWN
DO
PHONE YOUR DEALER!