Channel Setup; Channel Search Setting - Goodmans GDVD301RP User Manual

1
4
2
CHANNEL
Auto Tuning System
Fine Tune
Programme Swap
Erase Programme
Exit
Confi rm
3
CHANNEL
Auto Tuning System Start
Fine Tune Cancel
Programme Swap
Erase Programme
Exit
Confi rm
4
4a
Auto Tuning System running, please wait
4b
No signal, check antenna connection.
Press ENTER to exit.
RW
54
4-1

Channel Search Setting

Channel Search is a tuner search and allows a channel to be confi rmed. During initial setup,
this DVD Recorder will select available TV channels. Yet, if more channels become available in
your area, you may need to repeat the Channel Search to update the available channels.
1. While doing Channel Search, it will erase and replace all previously stored channels.
2. Before doing Channel Search, make sure your TV connections has been made properly.
-- For Details on how to make TV connection to your DVD Recorder, please refer to the
Quick Guide.
Select
1
Press Channel in the stop mode to display the menus.
2
Press
3
Press
4
Press
4a
Channel Search then starts and your DVD Recorder will tune in all the receiv-
Select
able channels to your TV. This process may take several minutes to be done.
The total available Channel numbers are displayed when Channel Search is fi nished.
4b
A reminder message appears when the aerial connection did not make properly.
To return to the Setup MENU screen
Press button.
To fi nish the setup operation
Press to exit from Channel setup screen.

CHANNEL Setup

to select "Auto Tuning System".
/ to select "Start".
.