Connection And Preparation; Connecting The Television - Grundig XENARO GDP 5100 User Manual

CONNECTION AND PREPARATION

Connecting the television ...

AV1 AV2
... using a EURO-AV cable
1 Plug a standard EURO-AV-cable into the
DVD player and the appropriate socket (AV 2) on the television set.
Note:
If the DVD player is connected via the
carry out the setting described in "Selecting the video output socket (RGB or
S-Video)" on page 11.
... using a Y/C cable (S-VHS) and cinch cable
1 Plug a standard Y/C cable into the
player and into the appropriate socket (S-VIDEO IN) on the television.
2 Plug a standard cinch AV cable into the
DVD player and the appropriate sockets (AUDIO IN) on the television.
Note:
If the DVD player is connected via the
carry out the setting described in "Selecting the video output socket (RGB or
S-Video)" on page 11.
If the DVD player is connected to a television set with a 16:9 format, observe
the settings described in the "Selecting the screen format of the television"
section on page 11.
The colour norm of the DVD player's screen menus has to be adapted to the
format of the television. Make sure to observe the settings described in the
"Setting the TV system" section on page 27.
For information on connecting a HiFi system with analogue two-channel ste-
reo sound, see page 10. For information on connecting a digital multi-chan-
nel amplifier or a HiFi system with digital two-channel stereo sound, see
page 30.
©
»EURO AV TV« socket on the
©
»EURO AV TV« socket, you must
»S-VIDEO OUT« socket on the DVD
»AUDIO OUT L R« sockets on the
»S-VIDEO OUT« socket, you must
_______
9