18
en | Replacing an AUTODOME Bubble
6.
7.
8.
9.
2013.06 | 2.1 | F.01U.288.194
Remove the bubble from the trim ring.
Insert the replacement bubble inside the trim ring and align
the release tab (item 2, above) on the trim ring with the
release slot on the bubble.
Clean the bubble according to the instructions in Cleaning,
page 7.
Insert the replacement bubble and trim ring assembly into
the pendant housing, and rotate it clockwise until it locks.
The latch mechanism makes a click when it locks.
AUTODOME Bubble
Replacement (VG4, VG5,
or 7000 Series)
Bosch Security Systems, Inc.