ProForm 5.2 Treadmill User Manual page 7

2. With the help of a second person, carefully tip
the treadmill onto its left side. Partially fold the
Frame (56) so that the treadmill is more stable;
do not fully fold the Frame yet.
Cut the tie securing the Upright Wire (38) to the
Base (83). Locate the tie in the indicated hole in
the Base, and use the tie to pull the Upright Wire
out of the hole.
Attach a Base Pad (81) to the Base (83) in the
location shown with a Base Pad Spacer (13) and
a 1" Screw (2). Then, attach another Base Pad
(81) with only a 1" Screw (2).
3. Attach a Wheel (84) with the 3/8" Jamnut (34)
and the 3/8" x 2" Bolt (4) that you removed in
step 1. Do not overtighten the Nut; the Wheel
must turn freely.
4. Identify the Right Upright (78) and the Right
Upright Spacer (79), which are marked with
stickers. Insert the Upright Wire (38) through the
Right Upright Spacer as shown.
See the inset drawing. Tie the wire tie in the
Right Upright (78) securely around the end of
the Upright Wire (38). With the help of a second
person, hold the Right Upright near the Base
(83). Then, pull the other end of the wire tie until
the Upright Wire is routed completely through
the Right Upright.
2
Hole
83
56
13
81
2
3
83
4
84
34
4
38
78
Wire
38
Tie
7
38
81
2
78
38
79
83