Download  Print this page

GE 175D1807P596 Owner's Manual page 9

General electric dryers owner's manual
Hide thumbs


About reversing the door.
the Door
[] 5tondord #2
[] Tope-tipped
putty knife
[_ Open the door and remove the filler plugs opposite the hinges. With the door completel9
open, remove the bottom screw from each hinge on the dryer face, Insert these screws
about half wau into the TOP holes, for each hinge, on the opposite side (where you
removed the filler plugs).Applu firm pressure to get the screw started in new holes.
[_] Loosentop screw from each hinge on the dryer face half wag, With one hand holding the
top of the door and the other hand holding the bottom, remove the door from the druer
bg lifting it UP and OUT.
[_] Rotate the door 180°. Insert it on the opposite side of the opening bg moving the door
IN and DOWN until the top hinge and the bottom hinge are resting on the top screws
inserted in step 1.
I_] Removethe remaining screws from the side of the opening from which the door
was removed. With these screws,secure each hinge at the bottom. Tighten the
two top screws of each hinge. Reinsertthe plastic plugs on the side from which
the door was removed,


Table of Contents

  Related Manuals for GE 175D1807P596

This manual is also suitable for: