Network (And Power) Connector - Bosch DinionHD NBN-932 Installation Manual

DinionHD 1080p HDR
5.3

Network (and power) connector

Figure 5.3 Network connection
–
–
–
The LEDs beside the Ethernet connection indicate Power (red),
IP connection (green) and IP traffic (green flashing). They can
be disabled in the Installer menu.
Power is supplied to the camera via the Ethernet cable,
compliant with the Power-over-Ethernet standard.
Bosch Security Systems
4 5 6 | 4 5 6
D A
A L
T A
A R
M
1 2 3 | 1 2 3
- +
INSTALL
12VDC
24VAC
Ethernet (PoE)
Connect the camera to a 10/100 Base-T network.
Use STP Category 5e cable with RJ45 connectors (the
camera network socket is Auto MDIX compliant).
Power can be supplied to the camera via the Ethernet
cable compliant with the Power-over-Ethernet
(IEEE 802.3af) standard.
Installation Manual
E
T
H
-
P
o
E
MENU
STP Cat 5e
RJ45
Installation | en
AM18-Q0614 | v1.0 | 2012.03
21