Auto Setup; Quick Guide For Menu Operation; Selecting The Input Source - JVC LT-24G20 Instructions Manual

Auto setup

Your television has an Automatic Tuning
System which makes tuning in your television
easy. This Automatic tuning System scans
the entire reception range in your area and
automatically stores all available analogue
channels of suitable signal strength
in the correct order.
Preparation:
Press (Power) on the unit or on the remote.
1
Auto Installation menu will appear.
Press or to select desired language.
Then press ENTER
Auto Installation
- Step 1 -
Language
2
If you cancel Auto Power Off (see page 14),
press or to select Off. Then press ENTER
Auto Installation
- Step 2 -
Auto Power Off
Your TV has been set to
power off after 4 hours of
continuous viewing. If you
want to change this setting,
please choose Off. This
setting can also be changed
in the MENU
3
TV will search for TV-channels. Connect your
antenna now.
Continue with ENTER to start auto tuning.
The tuning's progress will be displayed in
percent for confirmation.
Auto Installation
- Step 3 -
Start Auto Tune
Note:
• Please be patient - the Auto Tuning process
can take several minutes to complete.
4
When the display reads 100%, normal TV-screen will
appear.
Note:
• To cancel the auto tuning, press RETURN during the
process.
THE AUTOMATIC TUNING PROCESS WILL
ONLY START BY ITSELF THE FIRST TIME YOU
SWITCH THE SET ON. HOWEVER YOU CAN
RESTART THIS PROCESS VIA THE MENU
SYSTEM (see page 10).
• If you could not set up a correct language in this auto
setup process, you will be able to make your preferred
language selection as illustrated in page 10 (On-screen
Language Selection).
.
English
Français
ภาษาไทย
Off
1 Hr
2 Hr
4 Hr

Quick guide for Menu operation

Call Menu and for example: Select "Auto
Search".
1
Press INPUT SELECT. Select TV, then press
ENTER. Press MENU.
2
Press or
Current Channel
Color System
Picture
Sound System
Auto Search
Sound
Manual Search
Channel
Fine Tune
Channel Management
PC Setup
Feature
3
Press or
Current Channel
Color System
Picture
Sound System
.
Auto Search
Sound
Manual Search
Channel
Fine Tune
Channel Management
PC Setup
Feature
... on the following pages the MENU can be called in
the same way as here.
4
Press MENU to exit the menu.
Note:
• The Menu screen disappears automatically after a
defined period of time with "OSD Timer". (see page 14)

Selecting the input source

Press INPUT SELECT to view a signal from
another device connected to your TV, such as a
VCR or DVD player. You can select each input
source depending on which input jacks you used to
connect your devices.
To select the video input source, press / , then
press ENTER.
Each time INPUT SELECT is pressed, the input
source toggles.
to select "Channel" then press .
Channel
1
Auto
BG
45.25 MHz
to select "Auto Search", then press .
Channel
1
Auto
BG
45.25 MHz
9