Download  Print this page

Troubleshooting - Black & Decker SSL16 Instruction Manual

16v* max & 20v max** cordless drills
Hide thumbs


Table of Contents
Use only mild soap and damp cloth to clean the tool. Never let any liquid get inside the
tool; never immerse any part of the tool into a liquid.
IMPOrTANT: To assure product SAFETY and rELIABILITY, repairs, maintenance and
adjustment (other than those listed in this manual) should be performed by authorized
service centers or other qualified service personnel, always using identical replacement
• Unit will not start.
• Battery pack will not charge. • Battery pack not inserted into charger. • Insert battery pack into
• Unit shuts off abruptly.
For assistance with your product, visit our website for the
location of the service center nearest you or call the BLACk & DECkEr help line at
recommended accessories for use with your tool are available from your local dealer or
authorized service center. If you need assistance regarding accessories, please call:
The use of any accessory not recommended for use with this tool could
be hazardous.
The rBrC™ (rechargeable Battery recycling Corporation) Seal on the
lithium-ion battery (or battery pack) indicates that the costs to recycle the
battery (or battery pack) at the end of its useful life have already been paid by
Black & Decker. In some areas, it is illegal to place spent lithium-ion batteries
in the trash or municipal solid waste stream and the rBrC program provides
an environmentally conscious alternative.
rBrC in cooperation with Black & Decker and other battery users, has established
programs in the United States and Canada to facilitate the collection of spent lithium-ion
batteries. Help protect our environment and conserve natural resources by returning the
tool to an authorized Black & Decker service center for recycling. You may also contact
your local recycling center for information on where to drop off the spent battery, or call


Possible Cause
• Battery pack not installed properly.
• Battery pack not charged.
• Charger not plugged in.
• Surrounding air temperature
too hot or too cold.
• Battery pack has reached its
maximum thermal limit.
• Out of charge. ( To
maximize the life of the
battery pack it is designed
to shutoff abruptly when
the charge is depleted.)
Possible Solution
• Check battery pack
• Check battery pack charging
charger until green LED
• Plug charger into a working
outlet. refer to "Important
Charging Notes" for more
• Move charger and battery
pack to a surrounding air
temperature of above 40
degrees F (4.5°C) or below
105 degrees F (+40.5°C).
• Allow battery pack to cool
• Place on charger and
allow to charge.

Hide quick links:


Table of Contents

  Also See for Black & Decker SSL16

  Related Manuals for Black & Decker SSL16

This manual is also suitable for: