Using The Features; Basic Operation - Goodmans GTVL15W17HD Instruction Manual

Tft lcd tv

Hide thumbs

Table Of Contents

Table of Contents

Basic Operation

Tuning in the TV channels

After connecting an aerial to your LCD TV and connecting the mains cable to the TV and

230VAC mains socket, turn the POWER SWITCH of rear TV on, an amber light will show on

the front centre panel of the TV.

Press the POWER button, the amber light will be turned into a light which does not have the

colour and the First Time Installation screen will show:

1. Make sure an aerial is fitted then press OK button on the remote to start

the Auto Programme Scan (APS).

2. In a short while you will see the TV programmes briefly as each channel is received and

stored in the memory. When APS is completed BBC1 will show, press CH+/- buttons to

view the other channels stored.

To power off press the

Selecting a Source

Press the INPUT button to display the function required (TV/AV).

Using the arrow buttons on the remote highlight the function required and press the OK button

to select the function.

Select TV Channel

Press the CH.+/- button on the remote control and the

TV to change the TV channels.

You can directly select the TV channel required by pressing 1,2 or 3 etc on the remote key

pad.

Press the

button on the remote control to swap the channel between the current

BACK

channel No. and the previous channel No.

Adjusting the Volume

Press the

button on the remote control or the

VOL. +/–

the volume.

To Mute the Sound

1 Press

and the sound cuts off.

MUTE

2 To turn mute off, press the

Sleep Timer

Press the

button continuously to select the sleep timer or turn the sleep timer from the

SLEEP

OFF,15,30,60minutes; when the LCD TV has reached the set time, it will automatically turn off.

the TV has no input signal, it will automatically power down to standby after 15 minutes.