Using The Features - Goodmans GTVL15W17HDVF Instruction Manual

USING THE FEATURES

Tuning in the TV channels
After powering up connecting an adapter to your LCD TV.The First Time Installation screen will
show:
1. Make sure an aerial is fitted then press OK button on the remote to start the Auto
Programme Scan (APS).
2.In a short while you will see the TV programmes briefly as each channel is received and
stored in the memory. After analogue stations have been located and stored into the
memory,the digital tuning scan will commence. Press the OK button to start the scan.
When APS is completed BBC1 digital TV will show, press CH+/- buttons to view the other
channels stored. To view analogue or digital TV press INPUT button and use the up / down
arrow buttons to select DTV or TV and then Press the OK button.Change channels by
ressing the CH +/- buttons.
To power off press the POWER button, the green light will change to red.
Selecting a INPUT
Press the INPUT button to display the function required (TV/AV).Using the arrow buttons
on the remote highlight the function required and press the OK button to select the function.
Select TV Channel
Press the CH.+/- button on the remote control and the CH.+/-button on the LCD TV to change
the TV channels.
You can directly select the TV channel required by pressing 1,2 or 3 etc on the remote
button pad.
Adjusting the Volume
Press the VOL. +/– button on the remote control or the VOL. +/- button on the LCD TV to adjust
the volume.
To Mute the Sound
Press MUTE and the sound cuts off.
To turn mute off, press the MUTE button again, or simply press the VOL +/- button.
Sleep Timer
Press the SLEEP button continuously to select the sleep timer or turn the sleep timer from the
OFF,15,30,60minutes; when the LCD TV has reached the set time, it will automatically turn off. If
the TV has no INPUT signal, it will automatically power down to standby after 15 minutes.
20 USING THE FEATURES