Table of Contents
Advertisement
USB memory/Portable
audio player (iDA-X313
only)/Changer (Optional)
iDA-X313
Double Action encoder
BAND/TA
/
/ENTER
SOURCE
iDA-X311/iDA-X311RR
Rotary encoder
BAND/TA
/
/ENTER
SOURCE
If a USB memory device/Portable audio player (iDA-X313 only) or
changer is connected to the unit, MP3/WMA/AAC files can be played
back.
• In the USB mode, when this unit is reset, ACC is switched from OFF
to ON, or when the USB is connected to this unit, "BANKING" is
displayed for several seconds.
Using the USB Memory Banking Function
1. What is a Bank?
A bank is a unit of up to 1,000 songs, which is stored in memory.
"Banking" refers to the grouping of songs available in USB memory, in
banks of 1,000 songs each.
2. About Banking
While a bank is being built up, "BANKING" is displayed. Banking
occurs whenever a USB memory device is connected or after power to
the head unit turns on.
It can take anywhere from a few seconds to up to 10 minutes for
banking to complete. This depends on the number of files and folders in
USB memory.
3. Available operations while Banking
• Search functions, such as album search or tag information (artist
display, etc.) are available. However, during Banking, the
information display changes so the VIEW operation is not available.
• With a song playing, Regular fast-forwarding and next song selection
is available.
• While Banking, the song playback order may differ from the song
order in the USB memory device.
14
-EN
FUNCTION/SETUP
VIEW
PRESET
FUNCTION/SETUP
VIEW
PRESET
BANK Function (USB memory)
This unit has a BANK function that automatically divides every 1,000
songs stored in USB memory into individual banks to make searching
and playing back a song easier. A maximum of 1,000 songs for one
bank can be stored according to the order stored in USB memory. A
maximum of 10 banks (10,000 songs) can be recognized. BANK1
(songs 1 to 1,000) is set as the default. If you want to search beyond
1,000 songs, perform the following operation to select a different bank.
BANK No.
BANK1
BANK2
BANK10
1
Press PRESET.
The BANK selection mode is displayed.
2
Turn the Double Action encoder (iDA-X313 only)
or Rotary encoder (iDA-X311/iDA-X311RR only).
Select the desired BANK.
You can scroll the page by pressing and turning the Double
Action encoder (iDA-X313 only).
3
Press
/ENTER.
Each operation can be performed in the selected bank.
• Even if the files are contained in the same folder, they may be saved
as different BANK.
Playback
1
Press
SOURCE to select the USB AUDIO or
CHANGER mode.
2
Press
or
to select the desired track (file).
Pressing and holding
forward track continuously.
• When a Portable audio player is connected, fast-forwarding/fast-
reversing is not available.
3
To pause playback, press
Pressing
/
again will resume playback.
• WMA format files that are protected by DRM (Digital Rights
Management), AAC format files that have been purchased from the
iTunes Store and files that are copy-protected (copyright protection)
cannot be played back on this unit.
• The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.
• If there is tag information, artist name/album name/track name is
displayed.
• ID3 tag/WMA tag
If an MP3/WMA/AAC file contains ID3 tag/WMA tag information,
the ID3 tag/WMA tag information is displayed (e.g., song name,
artist name, and album name). All other tag data is ignored.
• "NO SUPPORT" is displayed when text information is not
compatible with this unit.
• Before disconnecting USB memory, be sure to change to another
source or set to pause.
Song number
1~1,000
1,001~2,000
9,001~10,000
or
will fast backward/fast
/
.
Hide quick links:
Advertisement
Table of Contents
