Installation Procedure; Basic Installation; Installing The Windows Multi-Client Driver - M-Audio Trigger Finger User Manual

Installation Procedure

Basic Installation

Because it is a class-compliant device, installing the Trigger Finger on your Windows XP or Mac OS X computer is simple and straightforward:
• Use the supplied USB cable to connect the Trigger Finger to a USB port on your computer and you'll be ready to go! You can do this while the computer is on
or off, and no further driver installation will be necessary.

Installing the Windows Multi-client Driver

While class-compliancy offers easy setup and connection of the Trigger Finger, the Windows class driver is deficient in that only a single application, or program, can
use the Trigger Finger at any given time. For many users this is perfectly acceptable, as they will be using the Trigger Finger to communicate with their host audio
application only.
However, if you use multiple applications at once, including applications that are "ReWired" together (such as using Ableton Live as a host application and
simultaneously running Propellerhead Reason as a slave), you'll need to install the Windows Trigger Finger MIDI driver so both the host and ReWired application can
be controlled from the Trigger Finger simultaneously.
PLEASE NOTE: Do NOT connect your new MIDI controller to your computer until the appropriate driver files have been installed onto your computer.
1. Insert the MIDI Controller Driver CD-ROM into your computer's CD-ROM drive.
2. The computer will automatically display the interactive install screen shown below. If your computer fails to launch the installer, manually start the installer
by clicking on Start > My Computer > MIDI Controller Series.
3. Follow the on-screen directions to choose your language and product. Once you select your product, click "Install Drivers" to begin copying files.
4. Follow the driver installer's on-screen directions.
4