Using The Fingerprint Reader - Lenovo ThinkPad T530i User Manual

8. Set other items that you want to set.
9. Press F10 to save changes and exit.
10. Press Enter in the Setup Confirmation window to confirm the exit.
To set the security chip, you have to start Client Security Solution, and follow the instructions on the screen.
Note: Client Security Solution is not preinstalled on Windows 7 and Windows 8 models. To configure
the security chip, you need to download the latest version of Client Security Solution from the Lenovo
Web site. To download Client Security Solution, go to http://www.lenovo.com/support. Then follow the
instructions on the screen.

Using the fingerprint reader

Depending on the options you ordered, your computer might have an integrated fingerprint reader. By
enrolling your fingerprint and associating it with a power-on password, a hard disk password, or both
passwords beforehand, you can start the computer, log on to the system, and enter the ThinkPad Setup by
swiping your finger over the reader, without typing a password. Thus fingerprint authentication can replace
passwords and enable simple and secure user access.
Enrolling your fingerprint
1. Turn on your computer.
2. To start Lenovo Fingerprint software, refer to "Lenovo programs" on page 15.
3. Follow the instructions on the screen to enroll your fingerprint. For details, refer to the help information
system of the program.
LED behavior of the fingerprint reader
Table 4. LED behavior list_fingerprint reader
LED behavior
Steady green
Blinking green once
58
User Guide
Description
The fingerprint reader is ready to swipe.
The fingerprint is being authenticated or has been authenticated.