Installing And Replacing The Wireless Wan Card - Lenovo ThinkPad T530i User Manual

10. Connect the cables to the new wireless LAN card. Be sure to attach the gray cable to the connector
marked TR1 or Main on the card, the white cable to the connector marked RO or TR3 (center), and the
black cable to the connector marked TR2 or Aux.
Note: If the new wireless LAN card has two connectors, put the white cable in the cable protection tube.
11. Reinstall the keyboard. See "Replacing the keyboard" on page 78.
12. Reinstall the battery. See "Replacing the battery" on page 72.
13. Turn the computer over again. Connect the ac power adapter and all cables.

Installing and replacing the wireless WAN card

Before you start, print these instructions.
Prerequisites for replacing or installing the wireless WAN card
DANGER
Electric current from power, telephone, and communication cables is hazardous. To avoid shock
hazard, disconnect the cables before opening the cover of this slot.
Attention: Before you start installing a wireless WAN card, touch a metal table or a grounded metal object.
This action reduces any static electricity from your body. The static electricity could damage the card.
To replace or install the wireless WAN card, do the following:
1. Turn off the computer, then disconnect the ac power adapter and all cables from the computer. Wait
three to five minutes to let the computer cool.
2. Close the computer display, and turn the computer over.
3. Remove the battery. See "Replacing the battery" on page 72.
4. Remove the keyboard. See "Replacing the keyboard" on page 78.
.
Chapter 6 Replacing devices
89