Lenovo THINKSTATION 7782 User Manual page 51

9. To install a new hard disk drive into the blue bracket, flex the bracket and align pin
and pin 4 on the bracket with the corresponding holes in the hard disk drive. Do not touch the circuit
board 5 on the bottom of the hard disk drive.
Figure 27. Installing the hard disk drive into the bracket
10. Slide the new hard disk drive into the drive cage until it snaps into position.
11. Align the drive cage pivot pin with the slot
cage into the chassis.
12. Connect the signal cable and the power cable to the new hard disk drive.
1 in the upper drive cage and slide the hard disk drive
Chapter 4
1 , pin 2 , pin
.
Installing or replacing hardware
3 ,
41